Blade Assembly| B-1 | | 3 | | Metal Foil 2" X 40"(window flashing) or 1 roll stainless tape Source or copper foil | | p 10 | |
| B-2 | | 1 | | Spaceing block 3/4 ply 5" X 5-1/2"
| | p 14, D2, 3 | |
| B-3 | | 6 | | pulley centering blocks 1/2 plywood | | p 14, D2 | |
| B-4 | | 2 | | Ball bearings 7/8 ID and cam locks:
Fafnir GRA014 RRB Source | | p 14 | |
| B-5 | | 1 | | Blade Balance Kit | | p 14 | |
| B-7 | | 3 | | Blades wood 3 -5/8 X 1- 5/8 X 54" | | p 14, D2, 3 | |
| B-8 | | 1 | | Plywood backplate triangle 3/4 X 11-1/2" | | p 14, D2, 3 | |
| B-9 | | 1 | | Tin face plate triangle 16 gua. X 11-1/2 " | | p 14, D2, 3 | |
| B-10 | | 15 | | 10-32 X 3" SS/ RH Mach. Screws w/nut, flat,& lock
| | p 14, D2, 3 | |
| B-11 | | 3 | | 5/16 X 5-1/2" Hot dip galv. carriage bolts w/nut, & lock | | p 14, D2, 3 | |
| B-12 | | 2 | | 3 Hole pressed flange bearing mounts / 2 grease zerks.
Fafnir G52MSA Source | | p 14, D2, 3 | |
| B-13 | | 1 | | pulley, 10" OD X l" ID, aluminium, A-pitch Source | | p 14, D2, 3 | |
| B-14 | | 1 | | V Belt, 41" outside length, A-pitch
| | p 14, D2, 3 | |
| B-15 | | 3 | | Flat Head wood screws #12 X 2" | | p 14, D2, 3 | |
Feathering gizmo
| C-1 | | 1 | | Blade shaft, 1/2 inch galv. water pipe X 11-1/2" | | D2 | |
| C-2 | | 2 | | Iron angle brackets 7 -3/4" long, X 3" leg, X 1/8 | | D2 | |
| C-3 | | 1 | | Alternator bracket, iron 1/4 X 2 X 8
| | D2 | |
| C-4 | | 1 | | Rest arm, oak, 7/8 X 1-1/2 X 7-1/2 | | D2 | |
| C-5 | | 1 | | Feathering Lever, hardwood 7/8" X l" X (+ -) 13" | | D2 | |
| C-6 | | 1 | | Stainless Axle (Feathering pivot), 3/8 X 10, with 2, 1/8 X 3/4 cotter pins | | D2 | |
| C-7 | | 1 | | Alternator mounting pin, Iron, 3/8" X 4" rod
| | D2 | |
| C-8 | | 1 | | Belt tension adjustor, iron, 3/8" X 7" eye bolt | | D2 | |
| C-9 | | 5 | | U-bolt (5/16 cable clamp) w/2 -5/16 nut each | | D2 | |
| C-10 | | 4 | | Hex head bolt 2 X 1/4 with nut and lock each | | D2 | |
| C-11 | | 2 | | Machine screw 3/16 (No. 10-24) X 2, with nut & lock
| | D2 | |
| C-12 | | 1 | | Pull spring l" X 12" | | D2 | |
| C-13 | | 2 | | Bushings 3/8 ID X 1/2 OD X 5/8 long, 1/4 in ID brass nipple water pipe drilled to 3/8 inch works, or (Kingman K-68-6) from bearing supply. | | D2 | |
| C-14 | | 4 | | 3/8 flat washers | | D2 | |
| C-15 | | 1 | | Wood screw eye 3/16 (No. 10) X 2
| | D2 | |
| C-16 | | 1 | | Stainless cable 48" X l/8, 2 swage clamps | | D2 | |
| C-18 | | 1 | | Cotter Pin 1/8 X 2 (or a piece of wire) | | D2 | |
| C-19 | | 1 | | Cap screw 5/16 X 3/4
| | D2 | |
Frame
| F-1 | | 1 | | Tail vane arm 1-1/2 X 2-1/2 X 60" wood | | D1, 3 | |
| F-2 | | 2 | | 1-1/2 X 2-1/4 X 11" wood | | D1, 3 | |
| F-3 | | 2 | | 2 X 7/8 X 19" oak | | D1, 3 | |
| F-4 | | 1 | | Tail Vane, Sheet metal 10 X 36 X 16 guage, Plywood works too.
| | D1, 3 | |
| F-5 | | 2 | | Machine screws 3/16 (10 - 24) X 3 with flat & nut each | | D1, 3 | |
| F-6 | | 2 | | Carriage bolts 3 / 8 X 10 with 2 flat , 1 lock,1 nut | | D1, 3 | |
| F-7 | | 2 | | RH Machine screws 3/16 (10 - 24) X 2-1/2 with 2 flat, 1 lock & 1 nut each
| | D1, 3 | |
| F-8 | | 1 | | Galv. awning pulley for 1/8 inch line | | D1, 3 | |
| F-9 | | 1 | | Flat Head wood screw, No. 12 X 3/4
| | D1, 3 | |
Turntable
| T-1 | | 1 | | Pipe flange for one inch pipe | | D1, 3 | |
| T-2 | | 4 | | Bolts 1/4 X 2-1/4 " with 1 flat, lock and nut each long | | p 2, D1, 3 | |
| T-3 | | 1 | | Water pipe 1 inch ID X 15 3/4" long | | p 2, D1, 3 | |
| T-4 | | 1 | | Water pipe 1-1/4 inch ID X 19" long
| | D1, 3 | |
| T-5 | | 1 | | 3/8 copper tube 2-1/2" long | | p 3, D1, 3 | |
| T-6 | | 1 | | 5/16 Vinyl tube 20" long | | p 3, D1, 3 | |
| T-7 | | 3 | | Stainless hose clamp 5" - 6" dia | | p 3, D1, 3 | |
| T-8 | | 1 | | 3/4 inch copper pipe section 2 3/8" long, L wall
| | p 2, D1, 3 | |
| T-9 | | 1 | | 3/4 inch copper pipe section 1 3/4" long, L wall | | p 2, D1, 3 | |
| T-10 | | 1-1/2 | | 1/2" plastic pipe coupler drilled to 7/8 ID X 1- 1/16" 0D, 1- 7/8 long | | p 2, D1, 3 | |
Electrical| E-1 | | 1 | | 8 gauge multistrand copper wire, 44" long, PVC shielded
| | p 2, D3 | |
| E-2 | | 1 | | 14 gauge multistrand copper wire, 44" long, PVC shielded | | p 2, D3 | |
| E-3 | | 1 | | 8 gauge multistrand copper wire, 21" long, PVC shielded | | D3 | |
| E-4 | | 1 | | Wood block insulator 4 X 1-1/4 X 1-1/2 inches | | D1, 3 | |
| E-5 | | 1 | | Stainless hose clamp 2-1/2" dia
| | D1, 3 | |
| E-6 | | 2 | | Brass (automotive shim) wipers 1/2 X 3 inches | | D1, 3 | |
| E-7 | | 2 | | Brass RH machine screws 3/16 (10 / 24) X 1-1/2, nut, flat ea. | | D1, 3 | |
| E-8 | | 4 | | Ring terminal 1/4" hole, No. 8 wire | | D3 | |
| E-9 | | 2 | | Ring terminal 3/16 hole, No. 14 wire
| | D3 | |
| E-10 | | 2 | | Female push-on connectors, No . 14 wire | | D3 | |
| E-11 | | 1 | | Chrysler alternator 12 V, 42 amp, single field, model 7000 | | D1, 2, 3 | |
| E-12 | | 1 | | Voltage regulator for same alternator | | D3 | |
| E-13 | | 1 | | Mercury switch, micro - 7 mpl.-2,
| | D3 | |
| | | | or 1 metal strip 5/8 x 10 x 16 gage, 3 round head wood screws 1/2 X 10, 1 metal angle, 1/2 X 3/4, 1 inch brass machine screw, size 10/32, 2 nuts | | D2 | |
| E-14 | | 1 | | Manual on-off switch rated 5 amp 12 V | | D3 | |
| E-15 | | 1 | | 3 Amp bus fuse and clip for field wire | | D3 | |
| E-17 | | 1 | | Battery level indicator (volt meter) | | D3 | |
| E-18 | | 1 | | Mercury switch clamp | | D3 | |
| E-19 | | 1 | | Diode, 200v, .5 mfd | | D2, 3 | |